AMA-1 60watt acoustic amplifier 

The AMA-1 is a compact but powerful acoustic amplifier.
Physical dimensions: 24cm(depth) x 26.5cm(height) x 34cm(width)
Weight:  8kg
Finish: black splatter effect.
Mains: 3 pin IEC socket with on/off switch and 1A fuse. 

The AMA-1 is a compact but powerful acoustic amplifier. 

Dimensions:   24cm(depth) x 26.5cm(height) x 34cm(width)
Weight:   8kg
Finish:   Black splatter effect.
Mains:   3 pin IEC socket with on/off switch and 1A fuse.
Inputs:   2 identical channels, switchable low/high sensitivity, balanced XLR or unbalanced
   1/4" jack
Phantom power:  12v switchable on both channels.
Tone controls:  Both channels identical;  Bass +/-10dB 120Hz;
       Mid +/- 10dB 800Hz;
       Treble +/-10dB 10kHz.
Reverberation:  16 programs available on both channels, level independently adjustable.
DI Output:   Balanced signal pre-main volume signal.
Phones:   Mono feed signal pre-main volume with independent level control
Power:   220-240AC 50/60Hz 100VA IEC socket and lead supplied.
Amplifier:   60watts class D amplifier.
Speaker:   Full range dual cone 8" 60w 4ohm 50Hz - 19kHz. 

The AMA-1 has many useful professional features to help you make the most of your playing.

Phantom power (12v) is independently switchable on each channel.

Three band tone equalisation control. Bass, treble and mid control give you complete control of your music and helps to optimise your surroundings.

Parametric control on each channel. 10dB boost or cut, adjustable, of any frequency in the lower registers, adjustable by the frequency knob. The width or spread of this boost or cut is also adjustable using the width knob.

16 programs of reverberation available on both channels. Programs from simple spring reverb to more elaborate “slow deep flange with reverb”. The algorithms for these reverbs have been developed by world famous programmers and are available on many professional pieces of equipment. The level of the reverb added to each channel may be adjusted independently.

Effects send and return are available to allow addition of standard effects pedals and other outboard equipment, making your AMA-1 as fully expandible as you wish.

The balanced DI output allows a clean signal to be sent to your main amplification system if you are using your AMA-1 as a stage monitor.

Headphones socket with independent volume control allows you to listen privately.

Built-in microphone stand thread on base for easy stand mounting. (A sturdy stand should always be used)